[ROOT] StickMount v3.33
Automatically mount and dismount USB sticks on various devices like the Galaxy Nexus, Nexus 7 and Nexus 10. The Nexus 4 is not supported - this is an issue with the device, not with StickMount !
!!! REQUIRES ROOT !!!
Various Nexus and "stock Android" devices do not automatically "mount" mass storage devices (such as USB sticks). StickMount has been made to solve this problem, and give you access to the files on your USB connected storage from all your apps.
StickMount is known to work on many devices, but is built only with Nexus devices in mind.
Once StickMount is installed and you connect a USB stick with a USB host / OTG cable, the device will show you a popup if you want to open StickMount. It is advised to tell the device that you want to do this by default.
If you have just installed StickMount and you already had a USB stick connected, you must manually launch the program, or disconnect/reconnect the USB stick for StickMount to start working.
Mass storage devices are mounted to /sdcard/usbStorage/xxxx/.
(Pro) Kill apps preventing unmount
Sometimes an app has a file in use located on the USB device, and won't let go of it. This can prevent StickMount from unmounting the USB device. It will seem like the device stays connected (this is harmless). StickMount Pro provides an option that attempts to kill (terminate) all the apps that are preventing the unmount from succeeding.
(Pro) Media scan
StickMount Pro supports triggering the media scanner on each (un)mount action. This will automatically make the files on your USB device available in apps like Gallery and Music. Please note that the media scanner is not a visible process on all Android devices - it might actually work silently in the background without any visual cues. It may take a minute for your files to show up, so don't panic if they don't show immediately.
Even if you have this option enabled, you can prevent folders from being scanned by placing an empty file called .nomedia in that folder. If you put it in the root of the USB device, the entire device will not be scanned.
(Pro) Mount as partition label
Instead of using the block device name (sda1, sda2, sdb1, etc) for the partition, use the partition label as mount name. If the label is not available, fall back to the partition uuid (unique id). Only if that is not available either, use the block device name as mount.
This helps to keep your files in the same and easily identifiable place!
(Pro) Create symbolic links
Create symbolic links in /mnt and /storage to the actual mounts in /sdcard/usbStorage/, handy with some file managers and some apps that auto-detect storage locations.
Filesystem support
The filesystems supported depends on your device firmware. On most devices, at least vfat/fat/fat32 and ext2/3/4 are supported. On the latest Android versions, ntfs is also supported in read-only mode. Some devices also support exfat out the box, but most do not.
StickMount can utilize the ntfs-3g and mount.exfat-fuse binaries to add support for ntfs (untested) and exfat, but these are not included. If you place the ntfs-3g or mount.exfat-fuse files in the root of your internal storage ( /sdcard ), StickMount will automatically use them.
Troubleshooting
For some users, the app appears not to work, while in fact it is the device itself or the cable not working. One OTG cable is not the other OTG cable. If you have a USB stick with a light on it, it should light up when you connect it to the Galaxy Nexus using your OTG cable. If it does not, either your cable or your Nexus is faulty. 99 out of 100 times it is going to be your cable. That the cable works fine with another device does not mean anything! Cables known to work on a one devices may not work on another device.
SD card unmounting: If your SD card unmounts when unmounting a USB device, you have a bug in your kernel. This is not a bug in StickMount !
Sign up here with your email
ConversionConversion EmoticonEmoticon